He-Va Purpose Built Front Linkages:

Multi-Purpose Lift 40.01

Multi-Purpose lift is designed for mounting on e.g. slurry trailer tanks, tankers and tractors for which adapted side brackets are not available. Strengthened model for big forces as twisting and sudden pressures. The lifting capacity is 4.0 ton, measured in quick-couplings.

Standard equipment:

  1. Double acting hydr. with air filter on lowering side
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in red colour – two component.
  4. Can after request be painted in other colours without additional costs.
  5. Hydr. hoses between cylinder in a 3/8″ coupling.
  6. Quick-coupling for lift arms, cat. 3, with ø28 mm balls, cat. 3/2.
  7. Top link M36 and ø25 mm pin with parking device for the lift arms’ balls.
  8. Parking device for top link.
  9. The model for slurry trailer tanks is strengthened with top links between the lift arms for greater strength when driving with wide tools.

Multi-Purpose Lift 55.01
The Multi-Purpose lift is designed for mounting on e.g. slurry trailer tanks, tankers and tractors for which adapted side brackets are not available. Strengthened model for big forces as twisting and sudden pressures. The lifting capacity is 5.5 ton, measured in quick-couplings.

Standard equipment:

  1. Double acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in red colour – two component.
  4. Can after request be painted in other colours without additional costs.
  5. Hydr. hoses between cylinder in a 3/8″ coupling.
  6. Quick-coupling for lift arms, cat. 3, with ø28 mm balls, cat. 3/2.
  7. Top link M36 and ø25 mm pin with parking device for the lift arms’ balls.
  8. Parking device for top link.
  9. The model for slurry trailer tanks is strengthened with top links between the lift arms for greater strength when driving with wide tools.

Front-lift 21.01 – (40hp – 124hp tractors)
This standard linkage is a simple but but strong unit, designed for 30 kw (40 hp) to 90 kw (124 hp) tractors. Adapted side brackets for almost all tractor models can be supplied as an optional extra. This lift has a lifting capacity of 2.1 ton, measured in quick-coupling. Is not adapted to Front-PTO system.

Standard equipment:

  1. Single acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ coupling points.
  3. Cleaned and painted with a two-component primer and finaly painted in grey-black colour. If the lift is ordered with adapted side bracket bars, the lift will be painted in the tractor’s colour.
  4. 5.5 m hydr. hoses with couplings.
  5. Stop valve device on hydr hose at tractor connection, the lift can then be locked.
  6. Quick-coupling for lift arms, directly on the implement’s ø28 mm pins.
  7. Top link M30 with ø25 mm balls and pins.
  8. Bolts for side bracket bars – for mounting on the front-lift.
  9. When ordering the lift with adapted side bracket bars, chassis bolts are included.

Front-lift 36.01 (100hp – 200hp tractors)
Designed for medium sized tractors from 70 kw (100 hp) and up to 150 kw (200 hp). The 3.6 ton front-linkage fits closely around the tractor sub-frame providing stregth without restricting other tractor functions. This linkage has a lifting capacity of 3.6 ton, measured in quick-couplings.

Standard equipment:

  1. Single acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in the tractor’s colour – two component.
  4. Adapted to the individual tractor model.
  5. Chassis bolts & 5.5 m hydr. hoses with couplings.
  6. Stop valve device on hydr hose at tractor connection, the lift can then be locked.
  7. Quick-coupling for lift arms, cat. 2 with ø28 mm balls.
  8. Top link M36 and ø25 mm pin with parking device for the lift arms’ balls.
  9. Parking device for top link.
  10. For several models: direct hydr. connection. Look after * in “Tractor Makes / Model List”.

Front-lift 55.01 (upwards of 150hp tractors)
Designed for medium sized tractors from 110 kw (150 hp) and upwards. The 5.5 ton linkages is the largest in the HE-VA range providing the strength required for the work rates associated with larger horsepower tractors whilst the design avoids limiting other tractor functions. This front-linkage has a lifting capacity of 5.5 ton, measured in quick-couplings.

Standard equipment:

  1. Double acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in the tractor’s colour – two component.
  4. Adapted to the individual tractor model.
  5. Chassis bolts & 5.5 m hydr. hoses with couplings.
  6. Stop valve device on hydr hose at tractor connection, the lift can then be locked.
  7. Quick-coupling for lift arms, cat. 3, with ø28 mm balls cat. 3/2.
  8. Top link M36 and ø25 mm pin with parking device for the lift arms’ balls.
  9. Parking device for top link.
  10. For several models: direct hydr. connection. Look after * in “Tractor Makes / Model List”.

Front-lift 15.01 (28hp – 83hp tractors)
Designed for small to medium sized tractors from 20 kw (28 hp) up to 60 kw (83 hp). The 1.5 ton linkages are integrated into the design of the tractor providing all the benefits of their large counterparts. This linkages has a lifting capacity of 1.5 ton, measured in quick-couplings.

Standard equipment:

  1. Single acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in the tractor’s colour – two component.
  4. Adapted to the individual tractor model.
  5. Chassis bolts & 5.5 m hydr. hoses with couplings.
  6. Stop valve device on hydr hose at tractor connection, the lift can then be locked.
  7. Quick-coupling for lift arms, cat. 2-S with ø28 mm balls.
  8. Top link M27 and ø25 mm pin with parking device for the lift arms’ balls.
  9. For several models: direct hydr. connection. Look after * in “Tractor Makes / Model List”.

Front-lift 25.01 (70hp – 130hp tractors)
Designed for medium sized tractors from 50 kw (70 hp) and up to 95 kw (130 hp). The 2.5 ton linkages are designed closely around the tractor subframe to provide strength, simple fitting and become an integral part of the tractor. This linkage has a lifting capacity of 2.5 ton, measured in quick-couplings.

Standard equipment:

  1. Single acting hydr. with air filter on lowering side.
  2. Cat. 2, DS/ISO 8759/1/2, 825 mm between the lift arms’ balls.
  3. Cleaned and painted with a two-component primer and finaly painted in the tractor’s colour – two component.
  4. Adapted to the individual tractor model.
  5. Chassis bolts & 5.5 m hydr. hoses with couplings.
  6. Stop valve device on hydr hose at tractor connection, the lift can then be locked.
  7. Quick-coupling for lift arms, cat. 2 with ø28 mm balls.
  8. Top link M30 and Ø25 mm pin with parking device for the lift arms’ balls.
  9. Parking device for top link.
  10. For several models: direct hydr. connection. Look after * in “Tractor Makes / Model List”.

To find out more visit www.he-va.com